Babban sinadarin silicone shine silica dioxide, wanda ke da kaddarorin sinadarai masu ƙarfi kuma baya ƙonewa. Kayayyakin silicone a rayuwa ta ainihi suna amfani da su sosai, don haka duba da gano silicone yana da matuƙar muhimmanci.

To ta yaya ake duba silicone? Menene ma'aunin dubawa?

Ɗaya, daidaitaccen tsari

1. Zafin aiki: -15℃-+80℃

2, aiki matsakaici 45-95%

3. Zafin ajiya: -30℃-+85℃

4. Lokacin ajiya: A. Ana adana samfurin a ƙarƙashin fitarwa na tsawon wata 1

B. Ana iya adana samfurin a wuri mai faɗi na dogon lokaci ba tare da an cire shi ba

5. Matsin aiki: 86-106kpa

6. Yawan hulɗa:5MA a 12VDC/daƙiƙa 0.5 /sau 2*107

Hawan lamba: <12 ms

8. Juriyar rufi:>1012 ohms /500VDC

9. Ƙarfin wutar lantarki mai lalacewa >25KV/mm

Abincin Kayan Abinci na Silicone Raccoon BeasSilicone Teething Beads

Na biyu, bayyanar

1, launi

(1). Daidaitacce: bayan haɗawar vulcanization, ba a fallasa gel ɗin silica ba kuma babu babban bambanci

(2). Hanyar ganowa: a ƙarƙashin hasken halitta mai haske ko fitilar haske mai ƙarfin 40W, ana haɗa samfuran yau da kullun ko KATIN launi tare da samfuran da za a daidaita su. Hasken gani yana sama da 1.0.

2, barkono,

Daidaitacce: gefen samfurin ƙasa da ko daidai yake da 0.5mm

Ramin da ake buƙata: ƙasa da ko daidai yake da 0.1mm

3, rashin daidaituwa

(1) ma'auni: idan kauri na bangon roba mai kauri H-h ya yi ƙasa da ko daidai da 0.1mm, X = 20% yayin gano mold;

Idan kauri na bangon roba ya kasa ko daidai da 0.2mm, X = 15% lokacin da aka gwada mold ɗin

Idan kauri na bangon roba mai kauri H + H ya yi ƙasa da ko daidai da 0.3mm, X = 8% lokacin da aka gwada mold ɗin

(2) hanyar ganowa: gwaji tare da ma'aunin kauri.

silicone bead teether

4, fashewa

(1) ma'auni: babu wani tasiri ga taro da aiki: ƙasa da ko daidai yake da 1.0mm

(2) hanyar ganowa: aunawa da caliper na vernier

5, ambaliya ta abu

(1) misali: daga maɓalli zuwa ƙasa

Tsawon kayan monochrome bai kai ko daidai da tsayin harsashin da aka fallasa ba +1.0mm, bayan ba a iya ganin harsashin ba.

(3) hanyar ganowa: aunawa da caliper na vernier

6. An daidaita haruffan da ke sama

(1) ma'auni: ƙimar tsakiya ±0.15mm

(2) hanyar ganowa: aunawa da na'urar microscope

7, wurin ƙarar launi

(1) ma'auni: ɓangaren gel ɗin silica da aka fallasa bayan haɗuwar abokin ciniki: babu wani abu da aka gani a bayyane

Chinabeads na silicone masu daraja a abincimasana'anta, barka da zuwa shawara